Sticking
Sticking plate means that part or all the board stick on the plate during high pressure. The reasons for that are as following.
1 Incomplete curing of resin caused by the short time of the high pressure or the low temperature of the high pressure.
2 High moisture content of the raw material.
3 Too much glue on the melamine paper, the volatile content is too high.
4 Unclear steel plate surface, unsuitable release agent or uneven coating.
5 Inaccurate positioning of plate when high pressing.
To produce melamine impregnated paper, factory must use excellent printing decorative paper, raw material and reasonable processing technology.